Magma PCI Expansion System Bedienungsanleitung PDF herunterladen (Seite 7)

MAGMA

Preface iii

2. Disconnect the computer and peripherals from their power

sources to prevent electric shock or system board damage.

3. Follow the guidelines provided in “Regulatory Compliance

Statements” on the following page.

4. Disconnect any telephone or telecommunications lines from

the computer.

In addition, take note of these safety guidelines when appropriate:

♦

To help avoid possible damage to systems boards, wait five

seconds after turning off the computer before removing a

component, removing a system board, or disconnecting a

peripheral device from the computer.

♦

When you disconnect a cable, pull on its connector or on its

strain-relief loop, not on the cable itself. Some cables have a

connector with locking tabs. If you are disconnecting this type

of cable, press in on the locking tabs before disconnecting the

cable. As you pull connectors apart, keep them evenly aligned

to avoid bending any connector pins. Also, before connecting a

cable, make sure both connectors are correctly oriented and

aligned.

CAUTION

Do not attempt to service the system yourself except as explained in

this manual. Follow installation instructions closely.

Protecting Against Electrostatic Discharge

Electrostatic Discharge (ESD) Warning

Electrostatic Discharge (ESD) is the enemy of semiconducto

devices. You should always take precautions to eliminate any

electrostatic charge from your body and clothing before touching

any semiconductor device or card by using an electrostatic wris

strap and/or rubber mat.

Static electricity can harm system boards. Perform service at an ESD

workstation and follow proper ESD procedure to reduce the risk of

damage to components. MAGMA strongly encourages you to follow

1 2 3 4 5 6 7 8 9 10 11 12 ... 41 42

Keine Kommentare

Magma PCI Expansion System Bedienungsanleitung Seite 7