Magma ROBEN-3TM Bedienungsanleitung PDF herunterladen (Seite 91)

Magma

Roben 3 | Chapter 3 Verify Installation

In Windowsà Control Panel à Device Manager à View by connection

You should see these three PCI-to-PCI bridges. Right click on it and select “Properties”, select Hardware Ids from

dropdown list, you should see PCI\Ven_111D

Q: My host computer is having problem linking up with the expansion chassis. I have both interface

cards installed and seated firmly in their corresponding slot; one is installed in the host computer PCIe

slot and the other one in the expansion PCIE slot. Is there something wrong with the Interface card?

A: When using the 01-04973-03, in which comes in pair, one should be set to OFF-host and the other is set to ON-

Exp.

1. There's a Red Dip switch on the interface card that must be set correctly in order to work. The Red Dip

switch is labeled SW1.

2. 01-04973-03, SW1 when set to ON=EXP should be installed only inside the Magma Expansion unit.

3. 01-04973-03, SW1 when set to OFF=HOST should be installed inside the host computer.

4. If the 01-04973-03 cards are not set properly your computer won't link up with the Magma expansion.

See photos below:

1 2 ... 86 87 88 89 90 91 92 93 94

Keine Kommentare

Magma ROBEN-3TM Bedienungsanleitung Seite 91