Magma 7 Slot Series Spezifikationen PDF herunterladen (Seite 21)

NOTE

Not all PCI cards are as "well-behaved" as they should be. Sometimes

simply moving a PCI card that is having a problem to a different slot, o

reordering your cards in their slots, may alleviate "behavior" problems.

Step Three: Attach PCI Expansion Cable

Carefully position the PCI Expansion System so that the supplied

expansion cable will conveniently reach from the connector of the

CardBus Card to the connector of the 4 Slot chassis.

Attach one end of the PCI Expansion Cable to the CardBus Card and

secure it using the captive thumbscrews on the cable. Carefully route

the cable to the 4 Slot chassis and secure it with the captive

thumbscrews. It is important that the cable be attached securely to the

card connectors at both ends.

Step Four: Install the CardBus Host Interface Card

NOTE

CardBus PC Cards can only be used in systems that support CardBus

A special keying mechanism prevents insertion in systems that do no

support 32-bit CardBus PC cards.

1. Begin installation of your CardBus Host Interface Card by first

powering down your laptop computer. Use the procedures for

shutting down your operating system and shutting off power to

your system provided in your owner’s manual or system

documentation.

2. Insert the CardBus Host Interface Card with the MAGMA logo

side up, (gold strip up) into the PC Card slot. Gently push the

card until it is seated firmly.

NOTE

If your computer has two CardBus (or PC Cards) slots, MAGMA

recommends that you install the MAGMA CardBus card into Socket 2.

3. For more information on using CardBus PC cards, please refer

to your computer’s user manual or system documentation.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 62 63

Keine Kommentare

Magma 7 Slot Series Spezifikationen Seite 21